Usb Connections - Beckhoff CX2500-0070 Manual

Table of Contents

Advertisement

3.6

USB connections

USB 3.0 interface (X700 / X701 / X702 / X703):
The CX2500-0070 devices extend the CX20x0 system with four further USB 3.0 interfaces. Each interface
has a maximum power output of 900 mA. The maximum total power output is 2000 mA. The interfaces are
backward compatible with the USB 2.0 and USB 1.1 standards.
The USB socket is a type A socket. The USB interface complies with the USB 3.0 specification.
Pin
1
2
3
4
5
6
7
8
9
Maximum current output
The maximum total current over all four USB interfaces is 2000 mA. If this value is exceeded, the
whole module (i.e. all interfaces) is switched off. Once the overload situation is resolved (i.e. once
the consumer that caused the overload has been removed), the module restarts, and the other de-
vices are once again available.
CX2500-0070
Assignment
VBus
USB D-
USB D+
GND
StdA_SSRX-
StdA_SSRX+
GND_DRAIN
StdA_SSTX-
StdA_SSTX+
Version: 1.1
Mounting and wiring
Description
+5V Power
USB 2.0 data
Ground
SuperSpeed receiver
SuperSpeed receiver
Signal ground
SuperSpeed transmitter
SuperSpeed transmitter
17

Advertisement

Table of Contents
loading

Table of Contents