Table of Contents
Advertisement
Indicator lamp
●
– Lights or flashes during use to show the status (see below).
Protection film
– Peel off the protection film on both side of the lens.
Insulating sheet
Battery cover
– When using for the first time, remove the insulating sheet. Pull the
insulating sheet.
– To replace the battery
Watching
■
Indicator lamp status
Lights red for 2 seconds when turned on:
●
Sufficient battery level
Flashes 5 times when turned on:
●
Low battery level
Flashes red:
●
Under registering
Flashes red once every 1 second:
●
Under reconnecting to the TV
Flashes red 3 times:
●
Power off (Press and hold for more than 3 seconds when in use,
or automatically power off when registering / reconnecting fails, or
connection is lost)
Flashes red once every 2 seconds when in use:
●
3D mode is selected.
Flashes red twice every 4 seconds when in use:
●
2D mode is selected.
■
Storing and cleaning the 3D Eyewear
Store the 3D Eyewear in a cool, dry place.
●
Clean using a soft, dry cloth.
●
– Wiping the 3D Eyewear with a cloth that is covered in dust or dirt may
scratch the eyewear. Shake off any dust from the cloth before use.
– The lens of the 3D Eyewear is easily broken. Be careful when cleaning
the lens.
3D
3D Eyewear - Replacing battery
- 56 -
Advertisement
Table of Contents
