Table of Contents
Advertisement
Functions
Turn the connected equipment on and then switch the TV on.
●
Functions
Parts of the TV become hot
Even if the temperature of parts of the front, top and rear panels has
●
risen, these temperature rises do not cause any problems in terms of
performance or quality.
Overcurrent error message appears
The connected USB device may cause this error. Remove the device and
●
turn the TV off with Mains power On / Off switch, then turn it on again.
Check foreign objects are not inside the USB port.
●
An error message appears
Follow the message's instructions.
●
If the problem persists, contact your local Panasonic dealer or the
●
authorised service centre.
Built-in Camera does not work
Ensure the built-in Camera is held up. When the application for camera
●
operation is activated, the built-in Camera automatically pops up.
Face recognition may not work properly depending on surrounding
●
environment or condition (for example, darkened room, etc.).
The touch pad controller does not work or cannot be registered
Are the batteries installed correctly?
●
The batteries may be running low. Replace them with new ones.
●
Register again.
●
Settings
Use the touch pad controller within approx. 3.2 m from the TV. (The range
●
may be shortened depending on the obstacles between the TV and the
controller, or the surrounding environment.)
VIERA Link "HDAVI Control™"
VIERA Link "HDAVI Control™"
Setup
VIERA Touch Pad Controller
- 215 -
Summary of VIERA Link
Advertisement
Table of Contents
