Table of Contents
Advertisement
– Press again to return to TV Guide.
To exit TV Guide
●
EXIT
= Note =
When this TV is turned on for the first time, or the TV is switched off for more
●
than a week, it may take some time before TV Guide is completely shown.
This function varies depending on the country you select.
●
The postcode entry or update may be required to use the GUIDE Plus+
●
system depending on the country you select.
DVB-T and Analogue channels are displayed on the same TV Guide
●
screen.
D
and
A
may be displayed to distinguish DVB-T and Analogue
channels. There will be no programme listings for Analogue channels.
Timer Programming
The Timer Programming menu allows you to choose programmes that you
want to remind watching or record to the USB HDD.
1. Select the forthcoming programme or channel with
press
OK
to access
2. Select
USB HDD Rec.
To check / change / cancel a timer programming event
●
Recording
LED will turn to orange in Standby mode if
●
To return to TV Guide
●
BACK/RETURN
If you select the current programme, a confirmation screen asking
●
whether you want to watch or record the programme appears. Select
Timer Programming
record from the time you finish the timer programming event setting.
is displayed on the TV Guide screen if Timer Programming is set
●
from TV Guide.
Depending on the country you select, you can set
●
Recording
(see below).
= Note =
Not valid in Analogue mode
●
Timer Programming
●
received via the signal from the broadcaster or service provider.
Depending on the progress of recording, analogue channel may not be
●
selected.
/
Reminder
with
Timer Programming
with
/
and press
only works reliably if correct time information is
- 50 -
/
/
/
and press
OK
to set
Editing timer programming
Timer Programming
OK
to set
USB HDD Rec.
Signal Supported
/
and
is set.
to
Advertisement
Table of Contents
