Timer Programming - Panasonic TX-65FZ952B Manual

Timer Programming

This function allows you to select programmes that you want to record to the
USB HDD.
1. Display TV Guide
2. Select the forthcoming programme and press
3. Select Record and press
You can also set a timer event pressing
●
To check / change / cancel a timer event
●
Recording > Timer Programming > Editing Timer Programming
LED turns to orange in Standby mode when
●
To return to TV Guide
●
BACK/RETURN
If you select the current programme, a confirmation screen asking
●
whether you want to watch or record the programme appears. Select
Timer Programming
the time you finish the timer event setting. (Ireland only)
is displayed on the TV Guide screen if
●
from TV Guide. (UK only)
= Note =
Not valid in Analogue
●
Timer Programming
●
received via the signal from the broadcaster or service provider.
When recording programmes to the USB HDD, be sure to format the USB
●
HDD and enable it to record in
Recording > USB HDD setup
To set timer programming events of this TV on the network equipment
●
(smartphone, etc.) from outside the home network
Recording > Timer Programming > Remote recording
with GUIDE.
OK to set. (UK only)
and press OK
only works reliably if correct time information is
USB Device
- 109 -
OK to access.
.
Timer Programming
to set USB HDD Rec.
Timer Programming
Setup.
is set.
to record from
is set