LG LZ-H0106BA0.ENWALEU Owner's Manual page 23

Method to take each part out
Application tool : 250 CMH(69 L/s)
1.Open the maintenance cover
Loosen the setting knob assembled to the
maintenance cover with either hand or a +
driver, and open the maintenance cover.
2. Pull out the heat exchanger
Pull out the heat exchanger by holding the
clamp cord connected to each end of the
heat exchanger.
CAUTION: When pulling out the heat
exchanger connected to the product,
be careful not to drop the heat
exchanger
3. Remove the air filter.
Remove the air filter installed on left and
right side of the top of the heat exchanger.
CAUTION: When removing the air
filter, be careful of sharp edges.
WARNING: Turn the breaker off
when cleaning the product.
CAUTION: Gloves should be worn
when doing the maintenance work.
Main Body
Setting Knob
Clamp Cord
Maintenance and Service
Maintenance
Cover
Total Heat
Exchanger
Air Filter
Owner's Manual 23