Maintenance And Service - LG LZ-H0106BA0.ENWALEU Owner's Manual

Maintenance and Service

Maintenance and Service
Handling and Cleaning
To prevent function of the ventilator deteriorating, clean dust adhered to the air filter and total heat
exchanger regularly.
Cleaning Cycle
- Air filter: More than once every 6 months.
- Total heat exchanger: More than once every 2 years (Cleaning cycle may increase according to
Method to take each part out
Application tools : 100/150 CMH(28/42 L/s)
1. Open the maintenance cover
Loosen the setting knob assembled to the
maintenance cover with either hand or a +
driver, and open the maintenance cover.
2. Remove the air filter and pull out
the heat exchanger.
- Pull out the air filter installed at the bottom
of the heat exchanger.
- Pull out the heat exchanger by holding the
clamp cord connected to each end of the
heat exchanger.
CAUTION:
- When removing the air filter, be careful of
sharp edges.
- When pulling out the heat exchanger
connected to the product, be careful not to
drop the heat exchanger.
3. Remove the air filter.
Remove the air filter installed on top of the
heat exchanger.
CAUTION: When removing the air
filter, be careful of sharp edges.
WARNING: Turn the breaker off
when cleaning the product.
CAUTION: Gloves should be worn
when doing the maintenance work.
22 Ventilator
pollution degree.)
Main Body
Maintenance Cover
Setting Knob
Total Heat
Exchanger
Clamp Cord
Air Filter
Air Filter