Advertisement
Available languages
Available languages
Reading lamps when charging
While charging
The charge status lamp (
glows.
• Recommended ambient temperature for charging is 10 ‑ 35 °C. It
may take longer to charge or the battery may fail to charge
properly in extremely high or low temperatures.
The charge status lamp (
) will blink when there is a problem
with charging.
• When charging the shaver for the first time or when it has not
been in use for more than 6 months, the charge status lamp (
may not glow. It will eventually glow if kept connected.
Shave
Using the shaver
1
1
Press the power
switch.
After charging is completed
)
All lamps turn off.
2
2
Hold the shaver as
illustrated above and
shave.
Start shaving by applying gentle pressure to your face. Stretch
your skin with your free hand and move the shaver back and
forth in the direction of your beard. You may gently increase the
amount of pressure as your skin becomes accustomed to this
shaver. Applying excessive pressure does not provide a closer
shave.
You can also use a pen grip to hold the
shaver.
Caution
• Before shaving, check that the cleaning shutter is closed.
• Do not place your fingers on the power switch while using the
shaver. This may cause the shaver to turn off.
• Do not use shaving creams or face cleansers containing
scrubbing compounds as these may cause the outer foil to
clog.
)
Using the trimmer
Slide the trimmer handle up. Place
at a right angle to your skin and
move downwards to trim your
sideburns.
• We recommend using the shaver in an ambient temperature
range of 5 ‑ 35 °C. If used outside this range, the appliance may
stop operating.
5
Advertisement
