To insert a disc
1.
Press the Eject button. The disc tray slides out.
Using the CD-ROM Drive
2.
Place the disc in the tray with the label side facing up. Push the disc onto the hub until the disc clicks into
place.
Make sure you seat the disc firmly ov er the hub fingers. If you do not seat the disc firmly, you could
damage the optical driv e and you may not be able to open the tray.
Inserting a Disc
Close the tray by pushing it gently. The BUSY indicator on the drive flashes while your notebook is reading
3.
data from the disc.
Flashing BUSY Indicator
To remove the drive
Remove the PC Card from the notebook. See
Notes on CD media
Do not touch the surface of the disc.
Do not drop or bend the disc.
Do not use adhesive labels to identify the disc. The label may come off while the disc is in use in the optical
drive and cause the drive to malfunction.
Fingerprints and dust on the surface of a disc may cause read errors. Proper care of the disc is essential to
maintain its reliability. Do not use solvents such as benzine, thinner, commercially available cleaners or
Using PC Cards
for more information.
Page 17