Haier HW80-B14979 User Manual page 28

10-Installation
10-11
10-13
WARNING!
▶
dry and leack free!
▶ Take care these parts are never to be crushed, kinked, or twisted.
▶ If the supply cord is damaged, it must be replaced by the service agent (see warranty
card) in order to avoid a hazard.
28
10.7 Fresh Water Connection
10-12
Make sure that the gaskets are inserted.
1. Connect the water inlet hose with the angled
2. The other end connect to a water tap with a
10.8 Electrical Connection
Before each connection check if:
▶ power supply, socket and fusing are appropriate to
▶ the power socket is earthed and no multi-plug or
▶ the power plug and socket are strictly according.
▶ Only UK: The UK plug meets BS1363A standard.
Put the plug into the socket (Fig. 10-13).
end to the appliance (Fig. 10-11). Tighten the
screw joint by hand.
3/4" thread (Fig. 10-12).
the rating plate.
extension are used.
EN