Table of Contents
Advertisement
3. Note: Only use special salt for
dishwashers.
Do not use salt tablets. Do not
use table salt.
Place the softening salt in the
softening salt reservoir.
Funnel
1
Fill the water softening salt
reservoir completely with softening
salt. The water in the reservoir is
displaced and flows away.
Fit and close the lid of the
4.
reservoir.
Switch off water softening
If the refilling salt display bothers you,
for example if you use a combined
dishwasher detergent with a salt
component, you can switch off the
display.
Remark
To avoid damage to the appliance,
only switch off the water softening
in the following cases:
s The water hardness is a maximum
of 21 °dH and you use a combined
dishwasher detergent with salt
substitutes. You can use
combination detergents with salt
substitutes
Depending on the device version
1
s The water hardness is 0 - 6
1.
2.
a
a The display shows Hxx.
a The display shows
3.
4.
a The water softener has been
Regenerate the softening
system
In order to maintain trouble-free
operation of the softening system,
the device regularly performs a
regeneration of the softening system.
The softening system is regenerated
in all programs before the end of the
main wash cycle. This increases the
running time and the consumption
values of, for example, water and
electricity.
Softening System NL
according to the manufacturer's
instructions, only use up to a
degree of hardness of 21 °dH
without adding softening salt.
°dH. You don't need softening salt
to use.
on
to press.
Approx. 3 seconds on
to access the basic settings.
to give.
Press as many times until
the display shows H00.
To save the settings, press for
approx. 3 seconds.
switched on and the refilling salt
indicator is deactivated.
Busy-
25
Advertisement
Table of Contents
