Related Manuals for Siemens SE63HX52BE
Summary of Contents for Siemens SE63HX52BE
- Page 1 Dishwasher SE63HX52BE Information for Use Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
-
Page 2: Table Of Contents
Table of contents Safety .......... 4 Knife shelf........ 22 General information...... 4 Basket heights........ 22 Intended use........ 4 Before using for the first time .. 22 Restriction on user group.... 4 Performing the initial configura- Safe installation ........ 4 tion.......... 22 Safe use ........... 6 Damaged appliance ...... 8 Water softening system.... - Page 3 Basic settings........ 33 Overview of basic settings ..... 33 Changing basic settings.... 34 Cleaning and servicing .... 34 Cleaning the tub ...... 34 Cleaning products ...... 35 Tips on appliance care.... 35 Machine Care ...... 35 Filter system ........ 36 Cleaning spray arms ...... 37 Troubleshooting...... 39 Error code / Fault display / Sig- nal........... 39 Washing results ...... 41...
-
Page 4: Safety
en Safety Safety Observe the following safety instructions. General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. Intended use Only use this appliance: ¡... - Page 5 Safety en WARNING ‒ Risk of electric shock! ¡ Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Always use the supplied power cable for the new appliance. ▶ Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing.
-
Page 6: Safe Use
en Safety ¡ Contact between the appliance and installation lines may lead to a defect in these lines, e.g. gas pipes and power lines. Gas from a corroded gas pipe can ignite. A damaged power line can cause a short circuit. ▶... - Page 7 Safety en ¡ Highly caustic alkaline or highly acidic cleaning agents in con- junction with aluminium parts in the interior of the appliance may cause explosions. ▶ Never use highly caustic alkaline or highly acidic cleaning agents, in particular commercial or industrial products, in conjunction with aluminium parts (e.g.
-
Page 8: Damaged Appliance
en Safety ▶ Never kink, crush or modify the power cord. Damaged appliance WARNING ‒ Risk of electric shock! ¡ If the appliance or the power cord is damaged, this is danger- ous. ▶ Never operate a damaged appliance. ▶ Never operate an appliance with a cracked or fractured sur- face. - Page 9 Safety en WARNING ‒ Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. ▶ With redundant appliances, unplug the power cord. Then cut through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close.
-
Page 10: Preventing Material Damage
en Preventing material damage pipes supplied for the drinking Preventing material damage Preventing material dam- water and waste water connec- tions are not affected here. ¡ Modified or damaged water hoses may result in material damage and Preventing material damage Safe installation damage to the appliance. -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en ¡ Unsuitable cleaning agents may If you do not have much tableware to damage the appliance. wash, use the additional Half Load Do not use a steam cleaner. function. ▶ So as not to scratch the finish ▶... -
Page 12: Installing And Connecting The Appliance
en Installation and connection Note: The appliance has been tested "Install the drinking water connec- at the factory to check it is in working tion." → Page 12 order. It is possible that water has left Connect the appliance to the marks on the appliance. These power supply. -
Page 13: Electrical Connection
Installation and connection en When doing so, check that the drinking water connection is not kinked, crushed or twisted. Electrical connection Connecting the appliance to the electricity supply Notes ¡ Please follow the "Safety instruc- tions" → Page 4. ¡ Connect the appliance to alternat- ing current only, in the range of 220 - 240 V and 50 Hz or 60 Hz. -
Page 14: Familiarising Yourself With Your Appliance
en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with "E number and FD number" → Page 53. -
Page 15: Controls
Familiarising yourself with your appliance en "Detergent" → Page 26 is added to the detergent Detergent dispenser dispenser. "Bottom basket" → Page 20 Bottom basket Dispenser for special salt Add special salt to the dispenser for special salt. → "Water softening system", Page 23 Lower spray arm The lower spray arm washes the tableware in the bot- tom basket. - Page 16 en Familiarising yourself with your appliance 3 4 5 "Switching on the appliance" → Page 31 ON/OFF button and reset button "Switching off the appliance" → Page 32 "Terminating the programme" → Page 32 "Programmes" → Page 17 Programme buttons Special salt refill indicator Water softening system → "Adding special salt", Page 24 Rinse aid refill indicator Rinse aid system → "Adding rinse aid", Page 25...
-
Page 17: Programmes
Programmes en Programmes Programmes You can find an overview of the pro- runtime will change if the rinse aid Programmes grammes that can be selected here. system is switched off or rinse aid Different programmes, which can be needs to be added. found on the control panel of your The consumption values can be appliance, are available depending... -
Page 18: Information For Test Institutes
en Programmes Programme: Programme sequence Additional func- tions → "Additional Tableware: Time-optimised: ¡ Cleaning mixed table- ¡ Cleaning 65 °C functions", Speed 65° ware and cutlery. Page 19 ¡ Intermediate rinse Level of soiling: ¡ Final rinse 69 °C ¡ Removing common ¡ Dry household food remnants lightly dried-on. -
Page 19: Additional Functions
Additional functions en flashes. Additional func- a The programme and the additional tion function are saved. ¡ Switch on with mixed Tip: To reset the programme, reset loads containing table- IntensiveZone your appliance back to the factory ware with different soil- settings. ing levels, e.g. -
Page 20: Top Basket
en Features Raise or lower the basket evenly to Top basket the right level. Arrange cups, glasses and small items of tableware in the top basket. Check that the basket is level on both sides. Release the levers. Knife shelf a The basket clicks into position. You can adjust the height of the top Slide the basket back in. -
Page 21: Cutlery Basket
Features en Etagere Use the cutlery shelf and space un- derneath for small cups and glasses or for large items of cutlery, e.g. cooking spoons or serving cutlery. Cutlery basket Arrange cutlery in the cutlery basket, always without sorting it and with the sharp points downwards. -
Page 22: Knife Shelf
en Before using for the first time Push the lever forwards and fold Knife shelf down the prongs . Use the shelf for knives and long items of cutlery. To use the prongs again, fold them back up. a The prongs audibly click into posi- tion. -
Page 23: Water Softening System
Water softening system en Tip: You can change these settings Water softening system Water softening system and other "Basic settings" → Page 33 at any time. Hard water leaves limescale on the Water softening system tableware as well as the washing tank and parts of the appliance may become blocked. -
Page 24: Special Salt
en Water softening system Press repeatedly until the Note: Only use special salt for right water hardness has been set. dishwashers. Do not use salt tablets. The value H04 is set at the factory. Do not use table salt. To save the settings, press Add the special salt to the dis- for 3 seconds. -
Page 25: Regeneration Of The Water Softening System
Rinse aid system en ¡ The water hardness is 0 - 8 °E. The consumption values specified You do not need to use special are laboratory measurements determ- salt. ined in accordance with the currently applicable standard and using the Press . Eco 50°... -
Page 26: Setting The Amount Of Rinse Aid
en Detergent Add rinse aid up to the max mark. To save the settings, press for 3 seconds. Switching the rinse aid sys- tem off If you find the rinse aid refill indicator irritating, e.g. when using combined detergents with a rinse aid compon- ent, you can switch the rinse aid sys- tem off. - Page 27 Detergent en starch and remove protein. Oxygen- Separate detergents based bleaching agents are generally Separate detergents are products used to remove coloured marks, e.g. that do not contain components other tea or ketchup. than detergent, e.g. powder deter- Note: Follow the manufacturer's in- gent or liquid detergent.
-
Page 28: Unsuitable Detergents
en Detergent ¡ The function of rinse aid is limited Unsuitable detergents with combined detergents. You will Do not use detergent which could generally get better results using cause damage to the appliance or rinse aid. present a risk to health. ¡... -
Page 29: Tableware
Tableware en Close the lid of the detergent dis- Damage to glass and table- penser. ware Only put glasses and china in the dishwasher if it is marked as dish- washer-safe by the manufacturer. Avoid damage to glass and table- ware. Cause Recommendation The following table-... -
Page 30: Arrange Tableware
en Tableware To save resources, do not pre- Cause Recommendation rinse tableware under running wa- The water temperat- Select a programme ter. ure of the programme with lower temperat- Observe the following when arran- is too high. ures. ging tableware: After the programme –... -
Page 31: Removing Tableware
Basic operation en Removing tableware Setting a programme To adjust the wash cycle to the soil- WARNING ing level of the tableware, select a Risk of injury! suitable programme. Hot tableware can cause burns to the Press the right programme button. skin. -
Page 32: Starting The Programme
en Basic operation Starting the programme Terminate programme Press To end a programme early or to ▶ switch from a programme that has a The programme has ended when already started, you will need to can- the display shows "0h:00m". cel it first. Notes Open the appliance door. -
Page 33: Basic Settings
Basic settings en Basic settings Basic settings You can configure the basic settings for your appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Display text Selection Description Water hardness H00 - H07... -
Page 34: Changing Basic Settings
en Cleaning and servicing Basic setting Display text Selection Description InfoLight I00 - I01 Switch InfoLight on or off. While the programme is running, a spot of light is projected onto the floor below the appliance door. This light will not be visible if the appli- ance is installed at eye level with the cabinet front fitted flush. -
Page 35: Cleaning Products
Wipe the door seals, This ensures the parts chine Cleaner for Dishwashers online the front of the dish- of the appliance will at https://www.siemens-home.bsh- washer and the con- remain clean and hy- group.com/store or from customer trol panel regularly us- gienic. -
Page 36: Filter System
en Cleaning and servicing Running Machine Care Filter system Notes The filter system removes coarse ¡ Run the Machine Care programme soiling from the dishwashing cycle. without any tableware in the dish- washer. ¡ Only use machine care products and machine cleaners specially designed for dishwashers. -
Page 37: Cleaning Spray Arms
Cleaning and servicing en Pull down the micro filter to re- Insert the filter system into the ap- move. pliance and turn the coarse filter clockwise. Make sure that the arrow mark- ‒ ings match up. Press the locking catches gether and lift the coarse filter out ... - Page 38 en Cleaning and servicing Pull up the lower spray arm to re- move. Check the outlet nozzles on the spray arms for blockages under running water and remove any for- eign bodies. Insert the lower spray arm. a The spray arm clicks into position. Insert the upper spray arm and screw it firmly in place.
-
Page 39: Troubleshooting
Troubleshooting en Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 40 en Troubleshooting Fault Cause Troubleshooting E:32-00 will light up altern- Remove the filter from the supply ately or indicator for water hose supply lights up. Clean the filter. Re-insert the filter in the supply hose. Screw the water connection back Check the water connection for leaks.
-
Page 41: Washing Results
Troubleshooting en Fault Cause Troubleshooting E:90-01 will light up altern- Mains voltage is too low. This is not a fault on the appliance. ately. Contact an electrician. Have the mains voltage and elec- trical installation checked by an electrician. E:92-40 will light up altern- Filters are soiled or blocked. - Page 42 en Troubleshooting Fault Cause Troubleshooting Tableware is not dry. Water collects in recesses of Position tableware at an angle ▶ the tableware or cutlery. where possible. The combined detergent Use rinse aid to improve drying per- used has a poor drying per- formance.
- Page 43 Troubleshooting en Fault Cause Troubleshooting Remnants of food on table- Tableware is placed too Arrange tableware with sufficient ware. close together or basket is space in between. overfilled. The spray jets must reach the sur- faces of the tableware. Avoid points of contact. Spray arm rotation is Arrange tableware so that it does ▶...
- Page 44 en Troubleshooting Fault Cause Troubleshooting Detergent residue in the ap- Tabs are used in the quick Select a more intensive "Pro- ▶ gramme" → Page 17 or use pliance or short programme. Dissolv- "Powder detergent" → Page 26. ing time of the tab is not at- tained.
- Page 45 Troubleshooting en Fault Cause Troubleshooting Stubborn white coatings are Too little detergent is being Increase the amount of detergent ▶ present on tableware, inside used. used or change "Detergent " → Page 26. the appliance or the door. Washing programme selec- Select a more intensive washing ▶...
- Page 46 en Troubleshooting Fault Cause Troubleshooting Coloured deposits (yellow, The formation of films is due Check the setting of the water orange, brown) that are easy to ingredients of food rem- softening system. to remove are present inside nants and tap water (limes- Add special salt.
- Page 47 Troubleshooting en Fault Cause Troubleshooting Irreversible clouding of Glasses are not dishwasher- Use dishwasher-proof glasses. ▶ glassware. proof, only suitable for dish- Glasses are usually only suitable for washers. use in a dishwasher, i.e. long-term wear or long-term changes must be expected.
-
Page 48: Information On Display Panel
en Troubleshooting Information on display panel Fault Cause Troubleshooting Add "Special salt" → Page 24. Special salt refill indicator Insufficient special salt. ▶ lights up. Sensor does not detect spe- Do not use special salt tablets. ▶ cial salt tablets. Refill indicator for special Water softening system is Setting the water softening system ▶... - Page 49 Troubleshooting en Fault Cause Troubleshooting Appliance does not start. Check whether the mains cable is properly inserted in the socket and on the rear of the appliance. Appliance door is not closed Close the appliance door. ▶ properly. → "Terminate programme", Programme starts automat- You did not wait until pro- ▶...
-
Page 50: Mechanical Damage
en Troubleshooting Mechanical damage Fault Cause Troubleshooting Appliance door cannot be Door lock has been activ- Close the appliance door with ▶ closed. ated. greater force. Door cannot be closed due Check whether the appliance has ▶ to installation method. been installed properly. When closed, the appliance door, its decor or attached parts should not knock against adjacent cabin-... -
Page 51: Clean Wastewater Pump
Transportation, storage and disposal en Insert the pump cover and press Clean wastewater pump down . Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. -
Page 52: Transporting The Appliance
en Customer Service Unplug the appliance from the Transporting the appliance mains. To avoid damage to the appliance, Cut through the power cord. empty it before transporting. Dispose of the appliance in an en- Note: Always transport the dish- vironmentally friendly manner. washer upright to prevent residual Information about current disposal water getting into the machine's con-... -
Page 53: Product Number (E-Nr.), Produc- Tion Number (Fd) And Consecut- Ive Numbering (Z-Nr.)
Technical specifications en The contact details for Customer Ser- defective supply lines or fittings up vice can be found in the enclosed to the Aqua-Stop connection on Customer Service directory or on our the tap. website. ¡ If your appliance is fitted with Aqua-Stop, you can in principle Product number (E-Nr.), pro- leave your appliance unattended... -
Page 54: Information Regarding Free And Open Source Software
en Technical specifications Information regarding Free and Open Source Software This product includes software com- ponents that are licensed by the copyright holders as free or open source software. The applicable licence information is stored on your home appliance. You can also access the applicable li- cence information via your Home Connect app: "Profile ->... - Page 56 Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001667353* 9001667353 (020420) 650 V5...