Table of Contents
Advertisement
Operation Cont´d
CAUTION
Before changing positions of manual swing,
tilt, or angle positions:
•
Park tractor on level ground, apply parking
brake, level implement boom, shut off tractor,
and remove key.
•
Make manual changes slowly and carefully
to prevent hazardous movement of mechanisms.
•
Never stand in positions where you could
become entrapped during adjustment changes
or if the 3-point hitch suddenly lowers.
Angle Adjustment
Mechanical Adjustment
Insert the turn table pin (7) using the various hole
combinations between the offset plate assembly and
the turn table holes to achieve angle positions up to 53
degrees each side. Secure turn table pin (7) with safety
pin (24).
Always secure lock pins with safety pins to
prevent lock pins from bumping out of the
positioning holes. Failure to do so may result in
accidents and/or damage to rear blade.
4350-2113-00 (Rev. 09/06/04)
CAUTION
7
24
RB084
Figure 2. Turn Table Pin
Operation
9
Advertisement
Table of Contents
