Table of Contents
Advertisement
FENDER ASSEMBLY, SINGLE AXLE
1. Review all directions and diagrams provided before starting
fender installation.
2. Center fender above tire using block to maintain the proper
height. Fender should be approximately 5" above tire to
allow for suspension movement (See Fig. 1). A maximum
width of 48" from center of the truck to the outside edge of
the fender should be maintained (See Fig. 2).
3. Place fender bracket weldements [Part No. 10H74] on fender.
Position the brackets to avoid any mounting obstacles on
hoist and/or truck chassis.
FIG. 1
Aluminum (10H93) / Steel (11H13)
(Diamond Plate Only)
INSTALLATION INSTRUCTIONS
Approximately 5"
All Figures are for Illustration Purposes Only
48" MAX
TIRE
(REF)
FIG. 2
HOIST
MAINFRAME
(REF)
TRUCK FRAME
(REF)
TRUCK
10/02/09
Advertisement
Table of Contents
