Advertisement
Location and function of controls
This following is the general figure of the design of the drive.
The drive's appearance and specifications may change without prior notice.
Front
1. Disc Tray
2. Drive activity indicators
The LED used to indicate the operation of
External Super Multi DVD Rewriter.
3. Eject Button
4. Emergency Eject Hole
Rear
1. Power Connector
This connector is used to connect to the USB
power cable. (DC-jack type) Or, this connector
is used to connect to the AC Power adapter
cord (5V, 2A, outside diameter: 4mm,
inside diameter: 1.75mm) (Not supplied).
2. USB Connector
This connector is used to connect to the USB
2.0 cable.
Removing the USB converter cable (For Windows)
The drive supports the plug and play(not swap) function of Windows, and can be removed and inserted by
performing the following operation.
1. Stop the application software being currently used.
2. Click the icon "
" of the taskbar located on your screen's bottom right side.
3. Click "Safely Remove USB Mass Storage Device-Drive[x:]".
4. Click "Ok" and then remove the USB converter cable.
NOTE
Don't remove the USB 2.0 cable when the busy indicator on the drive blinks, or during computer startup.
The removing procedure varies depending on your OS.
1
2 3 4
1
2
Advertisement
