Download Print this page
LG GP08LU11 Quick Setup Manual

LG GP08LU11 Quick Setup Manual

Gp08 series external super multi dvd rewriter

Advertisement

Quick Links

Installation

Hardware Installation

NOTES
• Please pay attention to handling Electrostatic
Sensitive Devices, you may use anti-static
products such as wrist straps, heel straps, mats
to protect your body from electrostatic.
• Make sure you have a personal computer with
an open USB port before connecting the drive
to your computer.
• Power for all other devices should be turn off
before attaching the cables.
Connecting to computer
Connect the drive to the computer as shown in
figure.
A. Using an USB 2.0 cable only.
1. Connect the USB 2.0 cable to the
External Super Multi DVD Rewriter.
2. Connect the other end of the USB 2.0
cable to your computer.
B. Using USB 2.0 Cable and
USB Power cable. (DC-jack type)
1. Connect the USB 2.0 cable to the
External Super Multi DVD Rewriter.
2. Connect the other end of the USB 2.0
cable to your computer.
3. Connect the USB power cable (DC-jack
type) to the External Super Multi DVD
Rewriter.
4. Connect the other end of the USB power
cable to your computer.
NOTES
• The Rewriter may get its power from the USB
power. All systems may not meet USB power
requirements and full performance may not be
achieved. In this case, connect to the included
USB power cable (DC-jack type.).
• Please do connect the USB cables by any
means other than specified above. Using the
wrong type of cable with this drive can cause
it to malfunction.
When the computer is ready, confirm that the
drive is detected. And then, insert the supplied
software CD into the External Super Multi DVD
Rewriter and install the software.
A. Using an USB 2.0 cable only.
USB 2.0 cable
B. Using USB 2.0 Cable and USB Power cable.
(DC-jack type)
USB 2.0 cable
USB Power cable
(DC-jack type)
NOTES
• The machine does not have an ON/OFF switch.
As soon as it is connected to the AC power, the
power up sequence begins.
The power supply cord is intended to serve as
the main disconnect device. The power outlet
shall be near the equipment and shall be easily
accessible.
• The appliance is not intended for use by young
children or infirm persons without supervision.
• Young Children should be supervised to ensure
that they do not play with appliance.
• If the appliance is supplied from a cord extension
set or an electrical portable outlet device, the cord
extension set on electrical portable outlet device
must be positioned so that it is not subject to
splashing or ingress of moisture.

Advertisement

loading

Summary of Contents for LG GP08LU11

  • Page 1: Hardware Installation

    Installation Hardware Installation NOTES • Please pay attention to handling Electrostatic Sensitive Devices, you may use anti-static products such as wrist straps, heel straps, mats to protect your body from electrostatic. • Make sure you have a personal computer with an open USB port before connecting the drive to your computer.
  • Page 2: Location And Function Of Controls

    Location and function of controls This following is the general figure of the design of the drive. The drive’s appearance and specifications may change without prior notice. Front 1. Disc Tray 2. Drive activity indicators The LED used to indicate the operation of External Super Multi DVD Rewriter.
  • Page 3: Specifications

    * For more SecurDisc information, visit http://www.securdisc.net Please visit www.lgservice.com and install the program, “LG ODD Online F/W update.” By using the program, you can automatically check the latest information about FirmWares and update the FirmWare.
  • Page 4: Safety Instructions

    Safety Instructions CAUTION: The laser used in the External Super Multi DVD Rewriter can damage your eyes. Do not attempt to open the cover. To reduce the risk of electric shock, do not remove the cover (or back). There are no user-serviceable parts inside. Refer servicing to qualified service personnel.

This manual is also suitable for:

Gp08nu11