Busch-Jaeger 6136/30M Operating Instructions Manual page 81

The "Clear list" button deletes all entries.
Message The control panel can be used as a message centre, i.e. windows and doors can be
function monitored using window contacts and rooms can be monitored by means of motion
(only for detectors.
control
If a window is broken open or if a motion detector detects a motion inside a room while
panel)
the message system is activated, a message is transmitted to the control panel which now
triggers the internal alarm. In addition, e.g. an external horn or a siren can be switched on.
At the same time, the message is displayed in the display (see also "List of alerts"). If
required, a message may also be transferred to a telephone interface which informs you or
calls for further help by phone.
If a window contact of a motion detector is faulty, this is indicated by a corresponding
fault message (see "List of alerts").
Activation and inactivation of the system can be directly on the control panel after
entering a PIN code or by corresponding bar-type switching contacts, block locks, keylock
switches or PIN code keypads, e.g. when leaving the house.
ENG
Fig. 54
33