Controlling Blinds/Roller Blinds - Busch-Jaeger 6136/30M Operating Instructions Manual

6.9

Controlling blinds/roller blinds

All blinds and roller blinds integrated into your EIB/Powernet system can be controlled if
this has been configured in your project.
Manual
• To control the roller blind, select e.g. the
control button "Roller blind" on the start page
and then the corresponding button.
• Use the arrow keys to move the
blinds/roller blinds up or down.
• Press briefly to stop and adjust slats.
• Press long to move up or down.
Control by
For information about roller blind control by time programme, see chapter: "Calling
time
up/modifying time programmes".
programmes
ENG
Fig. 52
31