Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for PrimeCables ERGO Cab-PC-08143
Summary of Contents for PrimeCables ERGO Cab-PC-08143
- Page 1 Model：Cab-PC-08143/08144...
- Page 5 Please make sure that cables are not damaged.
- Page 6 ×9 ×3 ×4 ×9 ×3 ×9 ×1 ×4 ×1 ×1...
- Page 7 Pinch Point Watch Your Hands...
- Page 9 Open ×2 ×2 ×2...
- Page 11 ×2 ×2 ×2 ×2 ×4 ×4...
- Page 12 1 0 . please do not fully tighten screws after all screws are in places.
- Page 14 13 . ×3...
- Page 15 14 .
- Page 16 1. Basic operation of manual controller a. Rise and fall Hold down the hand controller keyboard,table panel rising,stop after release; Hold down the hand controller keyboard,table panel drop,stop after release. b.Common height of memory When you go up and down to the height you want to store,then press the “M” key of the hand controller for about 3 seconds，wait for the screen to flash,press any of the buttons 1, 2, 3, 4 again,the screen stops flashing,at this time the height of rise and fall just write it down,the top 1, 2, 3 and 4 of the hand controller...
- Page 17 and you can hear the sound of dripping again to complete the reset.If you cannot reset, you should turn off the hand controller after the power is off, wait for the screen light to go out safely, and then turn on the power again, first turn off the collision function, then reset it (adjust to 0 bit), and turn on the collision function after the reset is completed.
-
Page 18: Specifications
3.Specifications 4.Trouble Shooting Below are the possible errors which can be dis-played.The errors will only be dis-played when a button is pressed.
Need help?
Do you have a question about the ERGO Cab-PC-08143 and is the answer not in the manual?
Questions and answers