Kidde P4010ACLEDSCA-2 User Manual page 2

Hardwire photoelectric smoke alarm with led strobe and voice
Table of Contents

Advertisement

Thank You for Purchasing this Kidde Alarm
Hardwired for 120 V AC, this model features a non-replaceable, sealed-in battery backup. It also contains
an LED Strobe, a voice message system and Hush® Control to temporarily silence nuisance alarms.
nOTE: Battery backup supplies power to the smoke alarm portion only. Strobe will not work without AC power.
Teach children how to respond to the alarm and that they should never play with the unit. Your Kidde Smoke
Alarm was designed for use in a residential environment. It is not designed for use in a recreational vehicle
(RV) or boat.
Please take a few minutes to thoroughly read this user guide which should be saved for future
nOTE:
reference and passed on to any subsequent owner.
The National Fire Protection Association (NFPA) and the manufacturer recommend replacing this alarm ten
years from the date code on back of alarm.
2
Product Support: 1-800-880-6788
Please write down the below information
and have this at hand when you call.
Date Code (on back): ___________________
Date of Purchase: ___________________
Where Purchased: ___________________
Date to Replace: ___________________

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P4010ACLEDSCA-2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents

Save PDF