Service Modes, Error Codes And Fault Finding - Philips 26MD257B/37 Service Manual

5. Service Modes, Error Codes and Fault Finding

index of this chapter:
5.1 CSM
5.2 Factory Mode
5. 3 Repair Flow Chart
5.1 CSM
It can display CSM windows message when press 1-2 3-6 5-4 on the button (RC) remote control in normal operation mode.
The following information is displayed on screen:
CSM Item
1: Set Type
2: Production code
3: SW-naming main-processor F3 ATSC V0.133.1 070130
4: Code 1
5: Code 2
6: Key (HDCP)
7: Digital signal quality ATSC
8: NVM-naming
About error code,Please refer to the table below.
Error code Event
0x01 DDR error
0x02 IIC bus error
0x03 Tuner error
0x04 Demod error
5. Service Modes, Error Codes and Fault Finding
Contents Remark
15MF237D/27 Project name
BZ000651123456 14 digit production-code(serial number)
SW version(F3:F3 family, ATSC: digital TV, V0.133.1:
software version, 070130: software release date)
FF FF FF FF FF Error codes in NVM/EEPROM (5 last logged errors)
FF FF FF FF FF Error codes in NVM/EEPROM (5 first logged errors)
Invalid HDMI information whether HDCP-key is valid
Digital signal level
PANEL_CLAA_15_XP3 Contents per Panel-type
TPM1.0U LA 13