Philips 26MD257B/37 Service Manual page 112

10
TPM1.0U LA
Step 7. Remove Metal frame
Unscrew sixteen screws as fig 8
Step 8 Remove AL foil
Unscrew eight screws as fig 9
Service Position
Insulation material
4.2 Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
a. While re-assembling, make sure that all cables are placed
and connected in their original position.
b. Pay special attention not to damage the EMC foams at the
SSB shielding. Check that EMC foams are put correctly on
their places.
4. Mechanical Instructions
In warranty, it is not allowed to disassembly the LCD panel, even the
backlight unit defect.
Out of warranty, the replacment of backlight unit is a correct way
when the defect is cused by backlight (CCFL,Lamp).
Fig 8
Fig 9
Fig 10
Fig 11