Monte Carlo Fan Company 5GFR52 D Series Owner's Manual And Installation Manual page 6

19
Glass
Glass cage
Finial
Place glass in glass cage, and then
attach the cage with glass onto light
fixture.
Install the finial removed in step 15 onto
the thread rod of light fixture to secure
the glass cage with glass.
HAND HELD INSTALL
22
Place battery cover over battery
compartment and buttons. Place remote
over 2 pins on front cover. Attach cover
of remote by placing over 4 pins and
snapping into place.
© 2013 Monte Carlo Fan Company
20
Left hand side
Setting the reverse switch in the right
hand side will result in downward airflow
and setting the switch in the left hand
side will result in upward airflow.
Note: Reverse switch must be set either
way completely. If the reverse switch is
set in the middle position, fan will not
operate.
23
WALL MOUNT INSTALL
Install wall control unit to outlet box using
machine screws provided.
6
21
Right hand
side
Reverse
switch
Battery cover
Battery
Remove battery cover. Install 12V battery
into wall remote. Duracell MN21 /
Evereday A23 / GP 23A all 12V. Attach
cover of remote by placing over buttons
and snap the battery cover in place.
24
Attach front cover to wall control unit with
screws provided. Snap battery cover in
place
11/5/2013