LG W2220P-BF User Manual page 13

Control Panel Functions
(SOURCE Hot key)
AUTO/SET
Button
Power Button
Power Indicator
Use these buttons to select or adjust functions in the
Buttons
On Screen Display.
To adjust the headphone/earphone volume. Press the
AUTO/SET button to MUTE ON and press it once
again to MUTE OFF. (Only for HDMI input)
MUTE OFF
Use the
MUTE ON
When two or more input signals are connected, you
can select the input signal (D-SUB/DVI-D/HDMI) you
want. When only one signal is connected, it is
automatically detected.
The default input signal is D-SUB.
Use this button to enter a selection in the On Screen
Display.
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press the
AUTO/SET button before entering the On Screen
Display(OSD). (Only for D-SUB input)
This will automatically adjust your display image to the
ideal settings for the current screen resolution size
(display mode).
The best display mode is
1680 x 1050
Use this button to turn the display on or off.
The power indicator stays red if the display is running
properly (On Mode). If the display is in Sleep Mode
(Energy Saving), the power indicator is blinking red.
buttons to adjust the volume.
12