Autonics BA Series Manual

BA Series
Small, Diffuse Reflective Type With Long Sensing Distance

Features

● Realization of long sensing distance (2m) by special optical design
● Protection structure IP64 (IEC standard)
● Built-in stability indicator
● Includes sensitivity adjustment function
● 2 color LED display
Please read "Caution for your safety" in operation
manual before using.

Specifications

NPN open collector BA2M-DDT
Model
PNP open collector BA2M-DDT-P
Sensing type
Sensing distance
Sensing target
Hysteresis
Response time
Power supply
Current consumption
Light source
Sensitivity adjustment
Operation Mode
Control output
Protection circuit
Indicator
Insulation resistance
Noise immunity
Dielectric strength
Vibration
Shock
Ambient illumination Sunlight: Max. 11,000㏓, Incandescent lamp: Max. 3,000㏓ (receiving illumination)
Environ-
Ambient temperature -25 to 55℃, storage: -25 to 70℃
ment
Ambient humidity
Protection structure
Material
Cable
Accessory
Approval
Unit weight
※ The temperature or humidity mentioned in Environment indicates a non freezing or condensation environment.
A-30
Diffuse reflective
2m (non-glossy white paper 200×200mm)
Translucent, opaque materials
Max. 20% at sensing distance
Approx. 1ms
12-24VDC ±10% (ripple P-P: max. 10%)
Max. 15mA (max. 30mA when the output is ON)
Infrared LED (850nm)
Sensitivity adjuster
Light ON
NPN or PNP open collector output
●Load voltage: Max. 26.4VDC ●Load current: Max. 100mA
●Residual voltage - NPN: Max. 1V, PNP: Min. 2.5V
Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit
●Operation indicator: Red LED
Over 20MΩ (at 500VDC megger)
±240V the square wave noise (pulse width: 1㎲) by the noise simulator
1000VAC 50/60Hz for 1minute
1.5mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours
100m/s² (approx. 10G) in each X, Y, Z direction for 3 times
35 to 85%RH, storage: 35 to 85%RH
IP64 (IEC standard)
Case: Acrylonitrile butadiene styrene, Sensing part: Polycarbonate, Indicator: Polycarbonate, Adjuster: IXEF
Ø3mm, 3-wire, 2m
(AWG24, core diameter: 0.08mm, number of cores: 40, insulator out diameter: Ø1mm)
Adjuster driver
Approx. 50g
BA2M-DDTD
BA2M-DDTD-P
Dark ON
●Stability indicator: Orange LED (light on), Green LED (dark on)