Whyte G-160 Works Supplementary Service Manual page 38

7.1.3: Rear Derailleur Adjustment
Reference figure 26. With the chain sitting on the smallest front chain-ring and also on the
smallest rear cassette sprocket, make sure that there is at least 5mm clearance between the
rear derailleur and the swinging arm chain-stay pivot. To adjust this clearance, using a flat
blade screwdriver, turn the B-screw as indicated in the inset view in figure 26. Turn it clock-
wise to increase clearance.
Figure 26: Rear Derailleur Adjustment
Rear Derailleur
8.0: WHYTE INTER GRIP SEAT CLAMP SERVICE
Tools Required:
Reference figures 27 to 49. To service the Inter Grip seat clamp, carefully follow these proce-
dures otherwise there is a risk of damaging some of the components. Especially remove
Page 38
WHYTE Service Manual
5mm AF Allen Keys (2 off, 1 fitted to a 3Nm to 15Nm Torque Wrench)
M6 cap-screw at least 40mm long or a small size flat blade screwdriver
SKF LGEP2 or Castrol Spheerol AP3 or Finish Line Teflon White Lithium
B-screw location
5mm minimum clearance
Complex grease
2016 Edition 1