Setting Up Projector Network E-Mail Alerts; Network Projector E-Mail Alert Messages - Epson EB-992F User Manual

Setting Up Projector Network E-Mail Alerts

You can set up the projector to send you an e-mail alert over the network if
there is a problem with the projector.
If you set the Standby Mode setting to Communication On, you can receive
the e-mail alerts even if the projector is in standby mode (when the power is
off).
ECO > Standby Mode > Standby Mode
s
a Press the [Menu] button, select the Network menu, and press [Enter].
b Select Network Configuration and press [Enter].
c Select the Notifications menu and press [Enter].
d Set the Mail Notification setting to On.
e Enter the IP address for the SMTP Server option.
Do not use "127.x.x.x" (where x is a number from 0 to 255) for
the SMTP Server.
a
f Select a number for the SMTP server Port Number, from 0 to 65535
(default is 25).
g Select a type of Authentication of SMTP server.
Enter a User Name for the SMTP server.
h
i Enter a Password for the SMTP server authentication.
j Enter the e-mail address to be indicated as the sender in From.
k Choose an address field, enter the e-mail address, and select the alerts
you want to receive. Repeat for up to three addresses.
Your e-mail address can be up to 64 alphanumeric characters
long. To enter more than 32 characters, use your Web browser.
a
l When you finish selecting settings, select Complete and follow the on-
screen instructions to save your settings and exit the menus.
If a critical problem causes a projector to shut down, you may not
receive an e-mail alert.
a
g g Related Links
• "Network Projector E-mail Alert Messages"
• "Projector Setup Settings - ECO Menu"
• "List of Functions" p.10

Network Projector E-mail Alert Messages

When a problem occurs with a projector on the network, and you selected to
receive e-mail alerts, you receive an e-mail containing the following
information:
113
p.113
p.147