Related Manuals for Kubota BH92
Summary of Contents for Kubota BH92
- Page 1 ASSEMBLY INSTRUCTIONS MODEL BH92 READ AND UNDERSTAND THIS MANUAL BEFORE ASSEMBLING © Code No. 7K505-7916-1 English (U.S.A.) PRINTED IN U.S.A KUBOTA Corporation 2009...
- Page 2 Sub Frame ........................28 CAB Spacer ........................31 ASSEMBLY [L3240(-3) - L5740(-3) ROPS Model] ..........31 Preparation ........................31 Layout of BH92 Backhoe Hydraulic Lines ..............32 Hydraulic Line .........................32 Sub Frame ........................34 ASSEMBLY [L4400-1, L4600 , L4701, MX4700, MX4800, MX5100, MX5200, MX5400, MX5800, MX6000] ..................
- Page 3 CONTENTS...
- Page 4 TO THE DEALER SAFETY 1. This manual contains procedures intended to assist To prevent accidents, read through the following items the dealer in unpacking and assembling the product before starting work, and always regard safety when before delivering to the customer. working.
- Page 5 (5) Before working under suspended or raised processes equipment, support the equipment or attachment processes mean any process that requires priority to prevent the machine from falling or moving out control due to its characteristics of having a high of place. probability of leading to physical injuries or fire disasters because of abnormal values and defects in manufacturing quality.
- Page 6 BCHECKING PARTS Remove all backhoe components. Referring to the illustration, insure that all components have been included. Backhoe bucket Dipperstick (arm) assy Main frame-Boom assy Pin (1.25 in. x 8.82 in.) Hex. bolt (M10 x 80) Locking nut (M10) Pin (1.5 in. x 10.2 in.) Spacer Pin (1.25 in.
- Page 7 (1) Front bracket (1) Front bracket (A) 224 mm (8.82 in.) (2) Rear bracket LH (2) Rear bracket (B) 242 mm (9.53 in.) (3) Rear bracket RH (3) Frame support (4) Frame support (4) Connecting plate LH (5) Connecting plate LH (5) Connecting plate RH (6) Connecting plate RH (6) Joint...
- Page 8 (1) Front bracket (2) Rear bracket LH (3) Rear bracket RH (4) Frame support (1) Front bracket (2) Rear bracket LH (3) Rear bracket RH (4) Frame support (5) Connecting plate LH (6) Connecting plate RH (1) Front bracket (A) 224 mm (8.82 in.) (2) Rear bracket (B) 242 mm (9.53 in.) (3) Frame support...
- Page 9 (1) Sub frame RH (2) Sub frame LH (3) Connecting plate RH (4) Connecting plate LH A For assembling, the optional outlet hose (Part No. 7K505-6492-0) is required. (1) Rear bracket (2) Frame support (3) Sub bracket RH (4) Sub bracket LH (5) Connecting plate RH (6) Connecting plate LH (7) Tool box stay...
- Page 10 (1) Front bracket LH (1) Front bracket (2) Front bracket RH (2) Rear bracket LH (3) Rear bracket (3) Rear bracket RH (4) Frame support (4) Frame support (5) Sub bracket RH (5) Sub frame RH (6) Sub bracket LH (6) Sub frame LH (7) Connecting plate RH (7) Connecting plate...
- Page 11 (1) Rear bracket LH (2) Rear bracket RH (3) Frame support (4) Connecting plate LH (5) Connecting plate RH (6) Cab spacer LH (1) Rear bracket LH (7) Cab spacer RH (2) Rear bracket RH (3) Frame support (4) Connecting plate LH (5) Connecting plate RH (6) Joint stay (7) Cab spacer LH...
- Page 12 ROPS or CAB, LA805 or LA1055 Loader and applicable backhoe mount kit only. 2. The BH92 backhoe can not be mounted on a tractor together with mid mount mower. 3. When using other implements with backhoe removed, mount the 3-point linkage to the tractor.
- Page 13 TRACTOR PREPARATION BSub Frame 1. Park the tractor on a hard and level surface. 1. Detach the front loader sub frame. 2. Remove the 3-point linkage from the tractor. ASSEMBLY [L3560, L4060, L4760, L5460, L6060 CAB Model] BPreparation 1. Detach the rear tire from the tractor. (1) Sub frame 2.
- Page 14 3. Attach the rear bracket in place. 5. Temporarily tighten the bolts and nuts in place. (1) Rear bracket (1) 3 - M16 x 60 bolts (2) 2 - M14 x 30 bolts 3 - 5/8 hardened plain washers 2 - M14 spring lock washers 3 - M16 spring lock washers Tightening torque: 124 to 147 N·m 3 - M16 nuts...
- Page 15 A If the number of bolts and that of hardened plain washers are the same, additionally put the hardened plain washers at the nut. (1) Bolt (2) Hardened plain washer (3) Nut 6. Wind the sealing tape around the joint coupler. Attach the female coupler and plug to joint coupler.
- Page 16 7. Attach the frame support, connecting plate and joint stay. BHydraulic Line Attach the joint coupler to joint stay. 1. Remove each bolt and raise the operating seat. And then lock the seat. (1) 4 - M8 bolts (2) 2 - M8 nuts (1) Frame support (2) Connecting plate (3) 6 - M16 x 50 bolts...
- Page 17 3. Wind the sealing tape around the backhoe outlet hose. 5. Connect the backhoe inlet hose to the coupler joint. Attach sleeve by band cord, male coupler and cap to the outlet hose. (1) Backhoe inlet hose Thread size: 3/4 - 16 UNF Tightening torque: 36 to 40 N·m (1) Backhoe outlet hose (Green) (3.7 to 4.1 kgf·m, 27 to 30 lbf·ft)
- Page 18 Attach the operating seat to the floor seat cover. C Loader option Tighten the bolts and nuts by correct tightening torque. (When the machine is equipped with the 3rd function or the hydraulic 2 lever quick coupler) 1. Disconnect the loader option's hoses. (1) Operating seat (2) Floor seat cover (3) 4 - M8 bolts...
- Page 19 3. Disconnect the coupler, the relay and the band cord. 4. Disconnect the 3rd function hose and the hydraulic 2 lever quick coupler hose. Remove the bolts and take the valve out of the sub frame. [3rd function] (1) 3rd Function Hose (2) HYD.
- Page 20 8. Connect the inlet hose that was dismounted in the previous step to the coupler joint and angle to 55° to BCAB Spacer avoid contact with the rear lift arms as shown in 1. Attach the cab spacer. picture. 9. Pass the backhoe outlet hose through the coupler joint hose guide and connect this hose to the tractor P.B.
Need help?
Do you have a question about the BH92 and is the answer not in the manual?
Questions and answers