Problems With The Scanner - Canon CanoScan FB1200S Product Manual

Problems starting Plug-in Module CS-S as a plug-in from within another program
Cause 1:
Solution:
Cause 2:
Solution:
Cause 3:
Solution:

Problems with the Scanner

Scanner not identified (Part 1: Windows)
• Please also read Scanner Not Identified
Cause 1:
Solution:
Cause 2:
Solution:
Insufficient memory to start Plug-in Module CS-S
Close programs other than the host program and start Plug-in Module CS-S
Plug-in Module CS-S is not installed
Install Plug-in Module CS-S (See Quick Start Guide)
Plug-in Module CS-S is not installed in the program's plug-in folder
Plug-in Module CS-S is a plug-in. If the other program does not have Plug-in
Module CS-S installed, it will not work. Install Plug-in Module CS-S (See Quick
Start Guide)
SCSI card not properly installed
Install SCSI card properly (Make sure the SCSI card is securely seated into the
slot)
SCSI driver not installed
Install SCSI driver (See Quick Start Guide)
(p. 74)
65