Canon CanoScan FB1200S Product Manual page 22

• The SCSI ID does not have to follow the order of connection. As long as an ID is not
WARNING
repeated, IDs between 0 and 6 can be used.
• SCSI device equipped computers usually have the following SCSI ID already assigned.
Refer to the manuals of the appropriate devices. Assign an unused SCSI ID to this scanner.
- For Windows
- For Macintosh
• Ensure that you unplug the AC adapter from the scanner before you change the SCSI ID or
terminator settings. After resetting them, reconnect the AC adapter and restart the computer.
• How to Set the SCSI ID and Terminator
To set the SCSI ID and terminator on this scanner, adjust the dip switches found on the back
panel of the scanner.
7: SCSI card or internal SCSI controller
0: Internal hard disk drive
3: Internal CD-ROM drive (Desktop model with an internal CD-ROM drive)
7: Macintosh CPU
Dip Switches
22