Table of Contents
Advertisement
Loading paper in the tray
2
Squeeze and slide the paper width guide and paper length lever to
locate them in the correct paper size slot marked at the bottom of the
tray to adjust to the size (see "Tray overview" on page 29).
2
3
Flex or fan the edge of the paper stack to separate the pages before
loading papers.
3
1
4
After inserting paper into the tray, squeeze and slide the paper width
guides and paper length guide.
2
• Do not push the paper width guide too far causing the media to warp.
• If you do not adjust the paper width guide, it may cause paper jams.
• Do not use a paper with a leading-edge curl, it may cause a paper jam or
the paper can be wrinkled.
3
1
3. Media and Tray
31
Advertisement
Table of Contents
