Toshiba RAS-07SKSX Service Manual page 54

No. Part name
5
Fan guard
6 Capacitor for
compressor
7 Capacitor for
fan motor
Procedures
1. Detachment
1) Perform work of item 1 of 1 and 1 of 2.
Requirement:
Perform the work on a corrugated
cardboard, cloth, etc. to prevent
scratches to the product.
2) Remove the front cabinet, and place it
down so that the fan guard side faces
downwards.
3) Remove the hooking claws by pushing a
minus screwdriver according to the arrow
mark in the right figure, and remove the
fan guard.
2. Attachment
1) Insert the claws of the fan guard in the
hole of the front cabinet. Push the hooking
claws (8 positions) by your hand and fix
the claws.
Requirement:
This completes all the attaching
work. Check that all the hooking
claws are fixed to the specified
positions.
1) Perform the common procedure 1.
2) Remove the fixing screw and the capacitor
band.
( 1-Screw ∅4 x 10s)
3) Disconnect the lead wires.
1) Perform the common procedure 1.
2) Remove the fixing screw and the capacitor
band.
( 1-Screw ∅4 x 10s)
3) Disconnect the lead wires.
Capacitor for
compressor
Screws
∅4 x 10s
– 53–
FILE NO. SVM-07021
Remarks
Minus screwdriver
Hooking claw
Capacitor band
Screws
∅4 x 10s
Capacitor
for fan motor