Toshiba RAS-07SKSX Service Manual page 15

7-1-2. Display of Remote Control
All indications, except for the clock time indicator, are displayed by pressing the
1.
Transmission mark
This transmission mark
remote controller transmits signals to the indoor
unit.
2
. Mode indicator
Indicates the current operation mode.
(AUTO, COOL, DRY and AUTO FAN)
3
. Temperature indicator
Indicates the temperature setting.
(17°C to 30°C)
4
. ECO indicator
Indicates when the ECO is in activated.
Press the ECO button to start and press it again
to stop operate.
5
. A, B change indicator remote controller
When the remote controller switching function is
set, "B" appears in the remote controller display
(When the remote controller seting is "A", there is
no indication at this position.)
1
2
•
•
•
4
indicates when the
3
7
6
•
• •
•
B •
•
Hr.ON OFF
• •
8
5
8
6
. Swing
Indicate when louver is swing.
Press swing button to start the swing operation
and press it again to stop the swing operation.
7
. FAN speed indicator
Indicates the selected fan speed.
AUTO, QUIET or three fan speed levels
( LOW , MED
Indicate Auto will be appear with Dry operation
only.
8
. ON/OFF TIMER indicator
Indicates when the ON/OFF TIMER operation.
(ON TIMER [Hr. ON], OFF TIMER [OFF]).
7
7
− 14 −
FILE NO. SVM-07021
button.
, HIGH can be shown.