Advertisement
Quick Links
Owner's Guide and Installation Manual
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
3MO52XXO-V1 / 3MTR38XXO-V1 Series Fans
RETAILER NAME:
cETL Model Number of 3MO52XXO-V1: 3MOR52
cETL Model Number of 3MTR38XXO-V1: 3MTR38
3MO52XXO-V1: 8.5 kg/18.7 lbs
3MTR38XXO-V1: 7.3 kg/16.1 lbs
Total fan weight with light kit
Advertisement
Related Manuals for Monte Carlo Fan Company 3MO52 O-V1 Series
Summary of Contents for Monte Carlo Fan Company 3MO52 O-V1 Series
- Page 1 Owner’s Guide and Installation Manual 3MO52XXO-V1 / 3MTR38XXO-V1 Series Fans cETL Model Number of 3MO52XXO-V1: 3MOR52 cETL Model Number of 3MTR38XXO-V1: 3MTR38 Attach sales receipt to this card and retain as your proof of purchase RETAILER NAME: DATE OF PURCHASE: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 3MO52XXO-V1: 8.5 kg/18.7 lbs...
- Page 2 All set screws must be checked and tightened where necessary before installation. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers. Customer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2011 Monte Carlo Fan Company 5/25/2013...
- Page 3 Place the blade ring holder onto ing securely. cable through the rubber gasket the blades aligning the screw aligning the holes from the gasket holes from the blades and ring and yoke. holder. © 2011 Monte Carlo Fan Company 5/25/2013...
- Page 4 Note:If Installing The Secondary Support Safety place. Cable in the U.S., Do Not Remove Knockouts In The Outlet Box. © 2011 Monte Carlo Fan Company 5/25/2013...
- Page 5 / GP 23A all 12V.Attach cover of remote by plac- cover. Attach cover of remote by placing over 4 ing over buttons and snap the battery cover in place. pins and snaping into place. place. © 2011 Monte Carlo Fan Company 5/25/2013...
-
Page 6: Fan Speed
To dim light hold down button “light dimmer”. The light will cycle from bright to dim to bright until button is released. Light will maintain last setting if turned off. © 2011 Monte Carlo Fan Company 5/25/2013... -
Page 7: Troubleshooting
WARNING: Over lamping the fan will result in the fan lights shutting down until the proper wattage of bulbs are installed. Reset the lights by turning off the wall switch, breaker,or by remote. Replace bulbs with the correct wattage bulbs, turn the power on. © 2011 Monte Carlo Fan Company 5/25/2013... - Page 8 Dec.2011 new format Jan.2011 Update customer service phone number May.2013 Update for CUL regulation Feb.2018 change to cETL, change listed model number May.2019 LED...