Table of Contents
Advertisement
Whirlpool UK Appliances Ltd
FUNCTIONS
2.1. SMART DISPLAY*
This function can be used to save energy. Please follow the instructions contained in the Quick Start
Guide to activate/deactivate the function. Two seconds after activation of the Smart Display, the
display goes off.
To adjust the temperature or use other functions, it is necessary to activate the display by pressing any
button. After about 15 seconds without performing any action, the display goes off again.
When function is deactivated the normal display is restored. The Smart Display is automatically
disabled after a power failure.
Remember that this function does not disconnect the appliance from the power supply, but only reduce
the energy consumed by external display.
Note: The declared appliance energy consumption refers to operation with the Smart Display function
activated. This function is available only on the model with User Interface on the door.
2.2. PROFREEZE
ProFreeze function works to maintain the right temperature in the following cases:
- Door opened for a while
The function activates when door opening causes the internal temperature to increase to values that
do not ensure safe storage of food and remains active until optimal storage conditions have been
restored.
- Fresh food stored in the freezer
The function activates when fresh food is placed in the freezer and remains active until optimal
freezing conditions are reached so as to ensure the best freezing quality with the lowest power
consumption.
Note: Besides the quantity of food loaded into the freezer, ambient temperature and the quantity of
food already inside the freezer affect the duration of ProFreeze function. Therefore significant duration
variations are quite normal.
2.3. ON/STAND BY
This function turns On/Stand-by the freezer compartments. To put the product in Stand-by, press and
hold the On/Stand-by button
freezer compartment does not work. Remember that this operation does not disconnect the appliance
from the power supply. To switch the appliance On again, simply press the On/Stand-By button
2.4. BLACK OUT ALARM
After a power blackout, your product is designed to automatically monitor the temperature in the
freezer when electricity is resupplied. If the temperature in the freezer rises above freezing level, the
Black Out indicator
electricity is reconnected.
To reset the alarm press the Stop Alarm button
In case of Black Out Alarm, the following actions are recommended:
•
If the food in the freezer is unfrozen but still cold, all the food in the freezer should be eaten within
the next 24 hours.
•
If the food in the freezer is frozen, this indicates the food was thawed and then refrozen when
electricity was re-supplied which degrades taste, quality and nutritional value and also could be
unsafe. It is recommended to not consume the food but to dispose of the entire content of the
Service Manual UK
for 3 seconds. When the appliance is in Stand-by, the light inside the
turns on, the Alarm indicator
blinks and the acoustical alarm sounds when
just once.
11 of 18
.
English
Advertisement
Table of Contents
