Setting The Clock - LG SolarDOM MA3882QCS Owner's Manual

Setting the
Clock
NOTE: Information Blink
For mode setting, blink will
guide to next step.
When your oven is plugged in for the
first time or when power resumes after a
power cut, a '12:00' will be shown in the
display; you will have to reset the clock.
If the clock (or display) shows any
strange looking symbols, unplug your
oven from the electrical socket and plug
it back in and reset the clock.
In the following example I will show you how to set the time for 14:35 when using the 24 clock.
Make sure that you have removed all packaging from your oven.
Make sure that you have correctly installed your oven as described
earlier in this book.
Press STOP/CLEAR.
Press ENTER/CLOCK once.
Turn CONTROL dial knob until display shows "14:00".
Press ENTER/CLOCK for hour confirmation
Turn CONTROL dial knob until display shows "14:35".
Press ENTER/CLOCK.
The clock starts counting.
20