Setting The Clock - LG SolarDOM Owner's Manual

Setting the
Clock
NOTE: Information Blink
For mode setting, blink will be
guide to next step.
When your oven is plugged in for the
first time or when power resumes after
a power cut, a '12:00' will be shown in
the display; you will have to reset the
clock.
If the clock (or display) shows any
strange looking symbols, unplug your
oven from the electrical socket and plug
it back in and reset the clock.
In the following example I will show you how to set the time for 14:35 when using the 24 clock.
Make sure that you have removed all packaging from your oven.
Make sure that you have correctly installed your oven as described
earlier in this book.
Press STOP/CLEAR.
Press Enter/Clock once.
Turn CONTROL dial knob until display shows "14:00".
Press Enter/Clock for hour confirmation.
Turn CONTROL dial knob until display shows "14:35".
Press Enter/Clock.
The clock starts counting.
20