Table of Contents
Advertisement
Available languages
Available languages
Installation Instructions
Installation Clearance Requirements
When installing the beverage cooler under a counter, follow the recommended spacing dimensions
shown.
For proper clearance of the electrical plug, allow at least 1" of clearance at the back as shown in
the diagram.
An installation next to a wall will require a minimum 2-1/4" door clearance to accommodate the
Zephyr handle.
The cabinet should allow at least 24" for the width and 33" for the height to accommodate the
beverage cooler.
The power cable is located on the back right of the unit and has a length of 72" to accommodate
multiple outlet locations.
Once you are ready to install the unit, you must adjust the feet to level the beverage cooler.
The installation should allow the unit to be pulled forward for servicing, if necessary.
16
PRB24C01AS-ADA Use, Care, and Installation Guide
P R E S R V ™
B E V E R A G E
C O O L E R
S I N G L E Z O N E
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the PRB24C01AS-ADA and is the answer not in the manual?
Questions and answers