Canon CD-300 User Manual page 30

Canon all in one printer user manual
Hide thumbs Also See for CD-300:
Table of Contents

Advertisement

8.
Set the desired number of copies, and
then press the ENTER/MEMORY button
again.
To change the number in increments of 1, press
or
button. To change the number 10 at
a time, press
9.
Press the Print button.
The printer begins printing. All three mode lamps
flash while printing is in progress.
If you wish to preview the print image before
starting actual printout, press the Preview but-
ton before pressing the Print button.
After previewing the image, you can begin
printing by pressing the Print button, or you
can return to the previous display by pressing
the Preview button a second time.
If you wish to stop printing before all copies
have been printed, press the Clear button. The
printer will finish printing the copy it is work-
ing on, and then stop.
You can make various adjustments to the image
quality before printing. For details, see "Adjust-
ing the Image Quality." (
You can also select whether to make a borderless
print. For information, refer to "Borderless Print-
ing." ( P.38)
28
or
button.
P.32)
8.
Choisissez le nombre d'épreuves à
imprimer et appuyez sur la touche
Enter/Memory.
Chaque fois que vous appuyez sur la touche
ou
, le nombre d'épreuves diminue ou
augmente d'une unité et chaque fois que vous
appuyez sur la touche
d'épreuves augmente ou diminue de 10 unités.
9.
Appuyez sur la touche Print.
L'impression commence. Pendant l'impression,
les trois témoins de mode clignotent.
Si vous souhaitez vérifier l'image avant de commencer
l'impression, appuyez sur la touche Preview avant
d'appuyer sur Print.
Après la prévisualisation d'une image, vous
pouvez commencer l'impression en appuyant
sur la touche Print ou retourner à l'affichage
des vignettes en appuyant de nouveau sur la
touche Preview.
Si vous appuyez sur la touche Clear, l'image en cours
d'impression est imprimée jusqu'à la fin et
l'imprimante s'arrête après cette image.
Pour le réglage de la qualité de l'image, référez-
vous à «Réglage de la qualité de l'image.» ( P.32)
Pour le détourage de l'image, référez-vous à «Im-
pression sur toute la surface du papier.» (
ou
, le nombre
P.38)

Advertisement

Table of Contents
loading

Table of Contents