Indoor Unit Overview And Operations - Fujitsu ASTG18KMCB Operating Manual

Indoor Unit Overview and Operations

1 Intake grille
Before starting operation, make sure that the intake grille has been
shut completely. Incomplete closing may have an effect on the proper
function or performance of the product.
2 MANUAL AUTO button
Use when the remote controller is lost or there is a malfunction.
Status Action
In operation Press more than 3 seconds.
Stopping Press more than 3 seconds and
less than 10 seconds.
Press more than 10 seconds.
(Only for servicing.*)
After cleaning Press less than 3 seconds.
*:To stop forced cooling, press this button or Start/Stop button on the
remote controller.
3 Wireless LAN control indicator and buttons
WLAN adapter is build-in for wireless LAN control.
For details, refer to the setting manual of the Wireless LAN control.
NOTES:
• The indicators can be turned off by using the mobile app.
4 Front panel
5 Human Sensor
Used for Energy Saving Program. Controls temperature setting by
detecting people in the room.
6 Vertical airfl ow direction louver
Each time you press Vertical SET button on the remote controller, the
angle of the vertical airfl ow direction louver moves as follows:
COOL or DRY mode
1
*
2
1 2
3
4
5
*: Default setting in each mode.
6 7
8
• Do not adjust by hand.
• At the beginning of AUTO or HEAT mode, they may stay on position
1 for a while for adjustment.
• If the angle is set to position 5-8 for more than 30 minutes in COOL
or DRY mode, the louver will automatically return to position 4.
• Keeping the position 5-8 during COOL or DRY mode may cause
condensation to form, and the drops may damage your property.
7 Power diffuser
In conjunction with movement of the vertical airfl ow direction louver,
the angle of the power diffuser moves as follows:
Vertical airfl ow
direction louver
1
Power diffuser
8 Horizontal airfl ow direction louver
Each time you press the Horizontal SET button on the remote controller,
the airfl ow direction range of the horizontal airfl ow direction louver will
change as follows:
5 3
2
4
1
9 Drain hose
Mode or operation
Stop
AUTO
Forced cooling
Filter indicator reset
See page 8
HEAT mode
3 4 5 6
2 3 4 5 6
Horizontal airfl ow direction louver
5 4 1 2
*
*: Default setting.
1
15
14
13
12
10 Remote controller signal receiver
For appropriate signal transmission between remote controller and
indoor unit, keep the signal receiver away from the following items:
- Direct sunlight or other strong lights
- Flat-panel television screen
In rooms with instantaneous fl uorescent lights, such as in-
verter type ones, the signal may not be transmitted properly. In
such a case, consult the store of purchase.
11 ECONOMY indicator (green)
*
7 8
Lights in ECONOMY operation and in 10 °C HEAT operation.
Blinks when it is time to clean the air fi lters(Installer setting). For
details, refer to Filter Indicator (Installer setting).
12 TIMER indicator (orange)
Lights in TIMER operation, and blinks slowly when the timer setting
error is detected.
For details, refer to "Auto-restart function" on page 9.
13 OPERATION indicator (green)
Lights in normal operation, and blinks slowly in Automatic Defrosting
operation.
Blinks during Demand Response operation. For details, refer to page
8.
14 Air fi lter
7 8
15 Air cleaning fi lters
Purify or deodorize the air, and provide fresh airfl ow.
3
AIR CONDITIONER Wall Mounted Type
CAUTION
See page 10
See page 11
OPERATING MANUAL
2
3
4
5
6
7
8
9
10
11
En-3