Indoor Unit Overview And Operations; Front Panel; Drain Hose - Fujitsu ASTG30CMTB Operating Manual

Indoor Unit Overview and Operations

1 Intake grille
Before starting operation, make sure that the intake grille has been
shut completely. Incomplete closing may have an effect on the proper
function or performance of the product.
2 "MANUAL AUTO" button
Use when the remote controller is lost or there is a malfunction.
Status
In operation Press.
Stopping Press less than 10 seconds.
Press more than 10 seconds.
(Only for servicing.*)
*:To stop forced cooling, press this button or "Start/Stop(
on the remote controller.
3 Wireless LAN control indicator and buttons
WLAN adapter is build-in for wireless LAN control.
For details, refer to the setting manual of the Wireless LAN control.
NOTES:
• The indicators can be turned off by using the mobile app.
4

Front panel

5 Human Sensor
Used for Energy Saving Program. Controls temperature setting by
detecting people in the room.
6 Vertical airflow direction louver
Each time you press "Vertical SET" button on the remote controller,
the angle of the vertical airflow direction louver moves as follows:
COOL, DRY or FAN
1
*
1
2
3
4
*: Default setting in each mode.
5
6
**: Suggested setting range
• Do not adjust by hand.
• At the beginning of AUTO mode, they may stay on position 1 for a
while for adjustment.
• If the angle is set to position 4-6 for more than 20 minutes in COOL
or DRY mode, the louver will automatically return to position 3.
• Keeping the position 4-6 during COOL or DRY mode may cause
condensation to form, and the drops may damage your property.
7 Horizontal airflow direction louver
Each time you press the "Horizontal SET" button on the remote
controller, the airflow direction range of the horizontal airflow direction
louver will change as follows:
5
3
2
4
1
8

Drain hose

9 Remote controller signal receiver
For appropriate signal transmission between remote controller and
indoor unit, keep the signal receiver away from the following items:
- Direct sunlight or other strong lights
- Flat-panel television screen
In rooms with instantaneous fluorescent lights, such as in-
verter type ones, the signal may not be transmitted properly. In
such a case, consult the store of purchase.
9387081152_OM.indd 3
Action Mode or operation
Stop
AUTO
Forced cooling
)" button
See page 8
FAN mode
mode**
2 3
4 5
Horizontal airflow direction louver
5 4 1 2 3
*
*: Default setting.
CAUTION
1
14
13
12
11
10 ECONOMY indicator (green)
Lights in ECONOMY operation.
11 TIMER indicator (orange)
Lights in TIMER operation, and blinks slowly when the timer setting
error is detected.
For details, refer to "Auto-restart function" on page 9.
12 OPERATION indicator (green)
6
Lights in normal operation, and blinks during Demand Response
operation. For details, refer to page 8.
13 Air filter
14 Air cleaning filters
Purify or deodorize the air, and provide fresh airflow
AIR CONDITIONER Wall Mounted Type
See page 10
See page 11
OPERATING MANUAL
2
3
4
5
6
7
8
9
10
En-3
31-Mar-17 10:10:32