Indoor Unit Overview And Operations - Fujitsu ASTG07CMCB Operating Manual

Indoor Unit Overview and Operations

1 Intake grille
Before starting operation, make sure that the intake grille has been
shut completely. Incomplete closing may have an effect on the proper
function or performance of the product.
2 MANUAL AUTO button
Use when the remote controller is lost or there is a malfunction.
Status Action
In operation Press more than 3 seconds.
Stopping Press more than 3 seconds and
less than 10 seconds.
Press more than 10 seconds.
(Only for servicing.*)
After cleaning Press less than 3 seconds.
*:To stop forced cooling, press this button or START/STOP button on
the remote controller.
3 Wireless LAN control indicator and buttons
WLAN adapter is build-in for wireless LAN control.
For details, refer to the setting manual of the Wireless LAN control.
NOTES:
• The indicators can be turned off by using the mobile app.
4 Front panel
5 Human Sensor
Used for Energy Saving Program. Controls temperature setting by
detecting people in the room.
6 Vertical air ow direction louver
Each time you press SET button on the remote controller, the angle
of the vertical air ow direction louver moves as follows:
COOL, DRY or FAN
mode**
1
*
2
1
3
4
5
* : Default setting in each mode.
6 7
**: Suggested setting range
• Do not adjust by hand.
• At the beginning of AUTO mode, they may stay on position 1 for a
while for adjustment.
• If the angle is set to position 4–7 for more than 30 minutes in COOL
or DRY mode, the louver will automatically return to position 3.
• Keeping the position 4-7 during COOL or DRY mode may cause
condensation to form, and the drops may damage your property.
7 Power diffuser
In conjunction with movement of the vertical air ow direction louver,
the angle of the power diffuser moves as follows:
Vertical air ow
1
direction louver
1
Power diffuser
• In SWING operation, power diffuser does not move.
8 Drain hose
9 Remote controller signal receiver
For appropriate signal transmission between remote controller and
indoor unit, keep the signal receiver away from the following items:
- Direct sunlight or other strong lights
- Flat-panel television screen
In rooms with instantaneous uorescent lights, such as in-
verter type ones, the signal may not be transmitted properly. In
such a case, consult the store of purchase.
10 ECONOMY indicator (green)
Lights in ECONOMY operation.
Mode or operation
Stop
AUTO
Forced cooling
Filter indicator reset
See page 8
FAN mode
2
3 4 5 6
2 3 4 5 6
2 3
CAUTION
11 TIMER indicator (orange)
Lights in TIMER operation, and blinks slowly when the timer setting
error is detected.
For details, refer to "Auto-restart function" on page 9.
1
15
14
13
12
12 OPERATION indicator (green)
Lights in normal operation, and blinks during Demand Response
operation. For details, refer to page 8.
13 Horizontal air ow direction louvers
7
Before you adjust the horizontal air ow direction, make sure that
the vertical air ow direction louver has been stopped completely.
Adjust two knobs by hand.
14 Air lter
15 Air cleaning lters
Purify or deodorize the air, and provide fresh air ow.
7
4
AIR CONDITIONER Wall Mounted Type
CAUTION
See page 10
See page 11
OPERATING MANUAL
2
3
4
5
6
7
8
9
10
11
En-3