Troubleshooting - LG V-FA282FT Owner's Manual

Upright vacuum cleaner
Table of Contents

Advertisement

Review this chart to find do-it-yourself solutions for a minor performance problems. Additional
service needed, other than those described in this owner's manual, should be performed at an
authorized LG Electronics Service agency.
WARNING
Electrical shock and personal injury hazard.
Disconnect electrical supply before servicing or cleaning the unit. Failure to
do so could result in electrical shock or personal injury.
PROBLEM
1. Unplugged at wall outlet.
CLEANER WILL
2. Switch in off position.
NOT RUN
3. Thermal protector activated.
1. Full or clogged dust bin.
POOR JOB OF
2. Broken agitator belt.
DIRT PICKUP
3. Clogged hose or nozzle.
4. Hose not inserted fully
5. Worn agitator.
6. Hole in hose
7. Dust bin assembly improperly
8. Belt not installed on motor shaft.
9. Motor protection system
DUST ESCAPES
1. Dust bin assembly improperly
THE DUST BIN

TROUBLESHOOTING

POSSIBLE CAUSE
installed.
activated.
installed.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product
it means the product is covered by the European Directive
2002/96/EC.
2. All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service or the shop
where you purchased the product.
POSSIBLE SOLUTION
1. Plug in firmly, check Motor protection system / fuse.
2. Push switch to floor or carpet mode.
3. See "To correct problem", page 9.
1. Empty dust bin and clean the filters.
2. Replace agitator belt.
3. Clean hose or nozzle area.
4. Insert hose.
5. Replace agitator.
6. Replace hose.
7. Properly install dust bin assembly.
8. Install belt on the motor shaft.
9. Check for clogs.
1. Properly install dust bin.
-16-

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vfa282ftw

Table of Contents