Grease Instructions - Emerson Bettis RPE-Series Installation, Operation And Maintenance Manual

Installation, Operation and Maintenance Manual
DOC.IOM.BE.EN Rev. 12
9.1

Grease Instructions

Check the product coding on the product labels and chapter 3 of this manual, to define
which type of grease to use.
Table 13.
Standard temperature
-20 °C to +80 °C / -4 °F to +176 °F
Castrol High Temperature -
Rocol Sapphire Premier -
Castrol Spheerol EPL 2 -
Total Ceran XM 220 -
We recommend using a suitable sized paint brush to apply the required amount of grease
on the parts as per Table 13 and Figure 26.
Table 14.
O-rings:
Housing Parts:
Piston Parts:
Piston Parts:
Figure 26
Reassembly
Recommended Greases
(Formerly called Castrol LMX)
(Formerly called Sapphire HI-TEMP 2)
(Formerly called BP Energrease LS-EP2)
(Formerly called Total Ceran WR2)
Grease Instructions
Part
A
B
C
D Bottom pinion bore
E O-ring & bearing groove
F
G
H Piston rack bearing strip
J Pinion bottom & O-ring groove
K Pinion top & O-ring groove
L
M
N Pinion bottom bearing
Grease Instructions
M
L
N
A
High temperature
-10 °C to +120 °C / +14 °F to +250 °F
Section of part
Completely
Piston bore
Top pinion bore
Rack teeth
Piston bearing
Gear teeth
Pinion top bearing
A
K
J
F
C
A
B
D
Section 9: Reassembly
Low Temperature
-40 °C to +80 °C / -40 °F to +176 °F
Castrol Optitemp LG2
SKF – LGLT 2
FUCHS – Renolit Unitemp 2
Amount of grease
Light film
Light film
Light film
Light film
Light film
Half the teeth depth full with grease
Light film on outside
Light film
Light film
Light film
Half the teeth depth
Light film (inside and out)
Light film (inside and out)
A
E
G
A
H
A
October 2021
35