Step 2:
Take the Cover (18) through the Handlebar Post (2) to the top, then secure with Bolt (20).
Tighten with and Spanner(A).
Take the Cover (97) through the Handlebar Post (2), then connect Trunk wire 2 (28) with
Sensor wire (96) (Figure A). Insert Handlebar Post (2) into Main Frame (1) and secure with
Bolt (13), Spring Washer (14) and Washer (15), Tighten with a Spanner (A). Finally, place the
Cover (97) on the Main Frame (1).