ASSEMBLY
Step 1:
Attach the Front & Rear Stabiliser (5 & 9) to the Main Frame (1) using Bolts (70), Spring
Washers (14) and Washers (15). Tighten with the supplied spanner (A).
Attach Left Pedal (59L) to Left Crank (57L). Turn the Left Pedal (59L) counter-clockwise by
hand until it is tight, then use the Spanner (B) to securely tighten. Attach Right Pedal (59R)
to Right Crank (57R). Turn the Right Pedal (59R) clockwise by hand until it is tight, then use
Spanner (B) to securely tighten.
Note:
The Pedals (No.59L/R) are marked "L" and "R" for Left and Right. Make sure you attach
the correct pedal to the corresponding crank.