Dometic BORDBAR AS 25 Operating Manual page 12

Operation
6.2 Using the cooler
➤ Place the cooler on a firm base.
➤ Connect the 12 V connection cable (fig. 2 1, page 3) into the cigarette lighter
socket or a 12 V socket in the vehicle
or
➤ Plug the 230 V connection cable (fig. 2 2, page 3) into the AC voltage socket
and connect it to the 230 Vw mains supply.
I
NOTE
Close the box tightly by pushing down the lid.
✓ The cooler starts cooling the interior.
➤ When operating at the AC mains supply: Push the ECO cooling capacity
control (fig. 1 2, page 3) to the desired position.
➤ To switch off the cooler, disconnect the plug.
6.3 Connecting to a cigarette lighter
I
NOTE
If you connect the device to the cigarette lighter of your vehicle,
remember that the ignition must be turned on to supply the device with
power.
12
Autogoods "130"
BordBar AS25
EN