Related Manuals for ElectrIQ eiQSTAR
Summary of Contents for ElectrIQ eiQSTAR
- Page 1 USER MANUAL OUTDOOR WALL AND CEILING HANGING HEATER eiQSTAR Thank you for choosing electriQ Please read the manual before using this heater and keep it safe for future reference.
-
Page 2: Table Of Contents
Visit our page www.electriQ.co.uk for our entire product range CONTENTS SAFETY INSTRUCTIONS PARTS LIST ASSEMBLY INSTALLATION OPERATION REMOTE CONTROL CHANGING THE ORIENTATION TROUBLESHOOTING CLEANING AND MAINTENANCE TECHNICAL SPECIFICATIONS SUPPORT... -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS IMPORTANT • Carefully read the instructions before operating this unit. • This appliance is for outdoor use only. • Rating: This unit must be only connected to a 220-240 V / 50 Hz earthed outlet. • Installation must be in accordance with the regulations of the country where the unit is used. - Page 4 • This unit contains no user-serviceable parts. • Always unplug or disconnect the appliance from the mains power supply when not in use, or when moving or cleaning it. Do not pull the cord to unplug the heater. • Keep the heater clean. Do not allow any object to enter the ventilation or exhaust opening as this may cause electric shock, fire, or damage to the heater.
-
Page 5: Parts List
PARTS LIST PARTS PART PART NAME L shape bracket M6mm*60mm screw M6mm screw M6mm*12mm screw ASSEMBLY Tools Needed: Pencil Hammer Spirit Level Screw Driver Drill A wall mounting bracket is provide with the heater which has been specifically designed to allow this product to be fitted to a ceiling or wall. - Page 6 WALL MOUNTED INSTALLATION CEILING MOUNTED INSTALLATION...
-
Page 7: Installation
CORRECT WALL AND CEILING POSITION INSTALLATION WITH TRIPOD STAND-(optional) -
Page 8: Operation
OPERATION 1. Turn on the power, the product will be in standby mode, the display will show (- -); 2. Press the function button, then press the heat levels to start the unit’s operation: (L1-L2-L3-L4- standby - off) REMOTE CONTROL Inserting Batteries Insert 2 AAA type batteries into your remote control 1. -
Page 9: Troubleshooting
• Do not run the unit until completely dry. • Place the heater in its original box or cover to protect it from dust when not in use. TECHNICAL SPECIFICATIONS Model eiQSTAR Voltage(V) 220-240V AC Wattage(W) 1500/2000/2500 Hertz (Hz) 50/60 Dimensions W×H×D(mm) -
Page 10: Changing The Orientation
UK SUPPORT www.electriQ.co.uk/support Please, for your own convenience, make these simple checks before calling the service line. If the unit still fails to operate call: 0330 390 3061 or complete the online form 1. Is the unit plugged into the mains? 2.
Need help?
Do you have a question about the eiQSTAR and is the answer not in the manual?
Questions and answers