Advertisement
1.1 Overview
The Wireless Operating Panel BWK201 consists of two parts: wireless panel and wireless
receiver. Wireless panel and wireless adapter communication, wireless receiver connection to RD
motion controller, user can control the cutting process reliable within a certain range (10 m)
through the wireless panel, easy to operate. The system allows the user can control the system
real time in the production process, improving the working efficiency and easy to use and reliable.
Parallel working with controller operation panel, there is no interference with each other.
Wireless controller BWK201 only supports communication with RDC63XXG motherboard.
1.2 Wireless Handle
The Wireless handle is shown in Figure 2-1.
Buttons description:
"Start/Pause" Button
"Stop" Button
"Reset" Button
"Trace On/Off" Button
"ESC" Button
"Laser Gate" Button
SHENZHEN RUIDA TECHNOLOGY
Wireless Operating Panel BWK201 Operation Manual
Figure 2-1 Wireless panel
：Start or pause working
：Stop working
：Reset the control board and HOME
：Power on/off the trace signal to control the LFS module
：Cancel
：Laser Enable/disable
2
Advertisement
