Advertisement
2.2 FAQ
Question: The wireless adapter cannot connect to wireless handle.
Solution:
(1) The wireless adapter is original version (the adapter side without reset button)
The adapter side without reset button, if wireless adapter cannot connect to wireless
handle, you can clear the wireless adapter address and reset, and then power-on wireless
adapter and wireless handle. The steps as follow:
Step1: Clear wireless adapter address, that is, after powering on, short connecting Pin4
of P1 terminal with Pin12 of U2 module for 3 seconds and then off; as below showed, the big red
circle on the right is Pin4 of P1 terminal, and the small red circle on the left is Pin12 of U2(U2 left
side penultimate pin)
Step2: Reset the adapter, that is, after powering on, short connecting Pin3 of P1 terminal with
Pin6 for 3 seconds and then off;
Step3: After powering on, waiting the wireless adapter and wireless handle connection again,
pay attention that only one wireless adapter and one wireless handle power on, if there are more
than one wireless adapter and wireless handle, please do above process repeatedly.
SHENZHEN RUIDA TECHNOLOGY
Wireless Operating Panel BWK201 Operation Manual
6
Advertisement
